A Ball and a Glove

Now I must say that I’m not much of a sports fan, but the next piece – yet another “oldie” – is one of my favorites.  I don’t have much to say about the carving itself.  It is about 1/4 scale, carved from Basswood (what else?) and finished with 3 or 4 coats of sanding sealer (sanded with 220 between coats) followed by a hard paste wax. I think turned out rather well, even if I do say so myself.  But I think that the story behind the carving is kind of interesting, so here goes:

I carved the Ball and Glove for my brother-in-law.  I’ll call him “B”.  “B” is sort of my opposite number.  He has always excelled in sports, basketball and Baseball in particular…me…uhhhh…not so much.  Family pressures many years ago denied him the chance to try it for real after the Pittsburgh Pirates scouted him.  Would he have made it?  We’ll never know for sure, but I think he probably had a pretty good shot at it.

Shoot ahead 35 years or so, his kids are grown and out of the house and the Pirates begin offering a Fantasy Baseball camp where for a not insignificant sum of money you can spend a week in Florida (right before spring training) and get to play real baseball under the tutelage of former Pirate players and coaches.  “B” signed up, did quite well and over the course of the next 10 or 11 years got to play in both Three Rivers Stadium (before they tore it down) and PNC Park.  He knows, and is known by, more former Pirates than anyone else I know.

Now, getting back to the carving.  The number “27” popped up many times in "B's" life.  It was part of his street address in several houses that he and my sister lived in, their zip code, phone numbers and probably some other places, too.  So it was natural that given the chance to pick the number for his uniform he chose “27”.

“But the base of the carving has a “4” on it”, you say.  OK, I’m getting to that.  After about his 3^rd or 4^th season at fantasy camp, “B” switched his number from “27” to “4” in honor of Ralph Kiner famous for, among other things, hitting a home run in Forbes Field that can be seen in the 1951 film, Angels in the Outfield.   

As a kid in the ‘50s, “B” spent many a happy Saturday afternoon in the bleachers of Forbes Field in Oakland (also now torn down) as a loyal member of the Knot Hole Club (remember that?).  He idealized Ralph Kiner who he still describes as “A Home Run Hitter and a positive role model for other players…and by extension “Knot Holers”, too.”

The Ball and Glove was carved for “B” for his birthday in 2005, soon after he made the number switch.

‘Til next time, keep makin’ chips!

The Sun and the Moon

I’m still vamping waiting for the time that I can post a few of the specials that I have been working on.    So, I’ve been strolling down memory lane -- more specifically through my photo file -- looking for other carvings that I think that people might like to see.

Here are a couple of pieces that I did some time ago for my nearly 4-year old Grandson, Henry's, bedroom wall.

The Sun is and original design and is about 8” across.  The Man in the Moon (I’ve done a couple of these) is a little larger and is based on a picture I found out on the web someplace.  As usual, they are both carved out of Basswood.

I hope you like them and soon I’ve have some new stuff to show…I promise!

“Til next time, keep makin’ chips!

My Second Navitity Set

Here’s a second, more abbreviated, Nativity Set that I carved about three years ago for a charity auction. 

While it consists of only three figures, each is quite a bit larger its counterpart in the original set: about 9-1/2” versus 6-1/2” tall.  Otherwise, the figures are nearly identical.

In this piece, the base is actually notable.  It is turned from a piece of nearly 100 year old wormy chestnut that spent about half of its life as a shelf in the storeroom of an industrial building here in Pittsburgh.  When the building was demolished in the 1980s, my current boss rescued a couple pickup truck loads of this highly desirable wood.  And now he has made some of his stash available to me.  Thanks, John!

'Til next time, keep makin' chips

My First Nativity Set

It's been a while since I have posted anything.  I vowed that I wouldn't do that, but things have been kind of busy here with two business trips almost back-to-back.  I *do* have a couple things that I *could* post now, but because they are gifts I can't disclose their existence yet.  But I will post them as soon as I can.

In the meantime, I have a few older things that I have yet to post.  I carved the nativity scene pictured here for my daughter and her family about 5 years ago. (The color in the overall shot is much too red.  The basswood looks much more like the individual pieces below.) I carved most of it the first year and then added a few fill-in pieces (the sheep, Ox, camel and stable) over the course of the next year or two.

All of the pieces shown are my original design.  Early on I was photographing my figures with a mirror so that you could look at two sides at once, as below.  

 

The manger is carved with two inset pieces, one with just the hay and one with the Babe in the hay.  That way, Baby Jesus doesn't arrive until Christmas Eve.

I hope you like it.  If you do please feel free to comment.

'Til next time, Keep makin' chips

Dancing with the Stars…er…I mean, Spoons

Believe it or not, I actually *did* come up with this idea on my own.  Although, I *do* have to admit I was *greatly* influenced by an image that I found during one of my many -- Yeah, you guessed it -- Google Image searches. 

The image I found looked like it was probably a single cartoon film cell (no, I don't know who did it.  In fact I don't seem to be able even *find* it again) showing two elaborately decorated spoons positioned on a dance floor in a rather typical “Dancing with the Stars” dip position.

I wanted to come up with something new and different to have as a table decoration at this year’s Christmas Craft show and I think I finally found it.  I have no real desire to sell it -- its real purpose is to generate customer interest -- so I’ll have it there with a ridiculously high price tag on it.  But, of course, in the event that somebody *really* likes it and isn’t driven off by the price, I may have a tough decision to make. :-)

This was one of those projects that I wasn’t positive that I was going to able to pull off until it was almost done.  After I drew up and carved the spoons, I drilled a small hole the tip of each of the bowls and glued in a dowel rod into each one for support.  But until I temporarily slipped these dowel rods into holes in a piece of scrap wood and held one spoon against the other, I still didn’t know exactly how, or even *if*, they would fit together. 

When I carved the “man spoon”, I left a little extra *meat* on his right hand.  Holding the two spoons together with one hand, I scribed the arc that was required to accept the “lady spoon’s” right shoulder with my other.  I carefully scooped out this area in “his” hand (*repeatedly* checking the fit, believe me!) to accept “her” shoulder. 

Once they seemed fit together the way I wanted, I shaped the rest of his hand and veeeeeeeery carefully drilled a hole through “his” hand (from the rear) into “her” shoulder, taking great care *not* to punch all the way through.  I then glued a small piece of dowel rod into “her” shoulder to hold them together during final assembly.

I cut a sort of semi-randomly shaped piece of cherry to use for the base (it seemed to me that symmetry would not work well here) and carefully transferred the mounting holes making sure that their spacing and angles exactly matched those in the scrap wood base. 

Much sanding and finishing later, I glued the spoons to each other and to the base. I added supports and rubber bands to hold everything steady, carefully mopped up all of the glue drips and went off to bed hoping that everything would actually hang together.  I spent much of time before sleep finally overtook me imagining how and where I would add all of the small gusset plates that I *just knew* I would need to hold things together when the glue wasn’t enough. 

Fortunately, while I slept, my faithful and resourceful magic wood glue fairies did a good job to make everything marvelously solid.  Even so, I still intend to handle it with kid gloves. :-)

The only thing left to add is a small, engraved brass plate on the sloped area on the left side.

‘Til next time, Keep makin’ chips.

Yet Another Lettered Lovespoon

Here is a Lettered Lovespoon that I just completed for a young couple who is getting married in late June.  Like most of my other Lovespoons, it is an original design carved from the traditional Lovespoon material, Basswood.

I try to follow a couple of personal “design rules” when I’m commissioned to carve a Lettered Lovespoon.  There’s no real good reason for these rules, you understand, they’re just my rules. 

Rule #1: The Lady’s initial goes on top, the Gentleman’s on the bottom.

Rule #2: The letters are *always* linked together.  Come on, this *is* a Lovespoon after all and a couple should be…well…linked together like the letters.

The letters always have a way of telling me how *they* want to displayed on the spoon.  Because the grain of the wood runs the length of the spoon, wide letters, like the “R” in this case, are often a problem in that they need a lot of extra support to keep their ends from just snapping off, either during the carving process or handling before the spoon is hung on the wall.  I took advantage of the width of the heart-shaped bowl to provide support for the “R”.
Having said that, however, because the tips of the “S” and the “R” stick out with very little “meat” to anchor them, the spoon will be best served hung well out of plate-throwing range.  :--)

When I attempted to hook the “S” into the “R” (per my rules), the arrangement just didn’t work for me visually because everything seemed to be squashed together at the bottom of the spoon leaving the top of the handle looking more than just a bit little naked. 

After some playing around on paper, I finally decided to include a set of interlocked wedding rings between the two initials.  Wedding rings are a common Lovespoon adornment but not one I had used before.  Using the rings -- locked into the “R” and into the “S” -- allowed me to slide the “S” up the handle for a more balanced look.  Everything is still interlocked so in my mind, at least, I haven’t violated my design rules.

I am pleased that I was able to make the handle disappear behind the two rings without jeopardizing the overall structural integrity of the spoon.

As soon as I began carving, I realized how much right-over-left-over-right-over-left there was going on around the rings.  This was a tough spoon to carve!  In retrospect, I think that I should have spread everything out just a bit more. 

A long time ago I started using Sanding Sealer rather than varnish or shellac on spoons, because IMHO, it seems to make a harder finish and, in the case of the basswood, adds some color.  I used 3 coats of sealer (sanding with 220 sandpaper between coats) followed by buffing with #0000 steel wool and a good coat of paste wax.  The finish came out wonderfully smooth.

My spoon and my best wishes go out to the soon to be “Mr. and Mrs.”!

'Til next time...Keep makin' Chips

New Ventures

I am getting ready to embark on a new venture…well, really TWO new ventures. 

Venture #1: 

If you look back through my postings about a year, you will see that I carved what I feel is a “more than passable” wooden replica of an 1884, Springfield 45-70 “Trapdoor” Rifle. It is hanging on the wall in the family room but for some time I have thought that I’d like to make some sort of a companion piece for it.  What I *didn’t* want to carve was a duplicate of the Colt Peacemaker cap gun carried by every young Buckaroo of the wild and wooly 1950s, myself included.

 So after much searching, I have finally selected my victim…err, I mean subject…to carve.  A Remington 1861 Cap and Ball Revolver. 

 Loyal readers…and I think/hope I have a couple… know that I spend a lot of time “Googling around” looking for images that I think will make good carvings.  As it turns out, the 1861 Remington is a *very* popular firearm among collectors and the web is just loaded with resulting really good photos to use as a “Go Bys”.  This shot is typical. 

The major problem is getting scaling information.  But some collectors have graciously agreed to make and send the critical measurements to me.  Given these “benchmarks”, I think I can just scale everything else off the photos.

As you might surmise, woodcarvings *look* nice but they are *amazingly* fragile.  So to avoid having to tell grandchildren…and not just a few adults:-)…not to handle the gun, I plan to display the gun in a box with a glass cover.  You can look but you can’t touch! 

My original thought was to make a pristine, velvet-lined walnut *presentation* style case -- but after seeing this picture, I think that the *well used* carrying case, complete with oil-stained and tattered instruction sheet seems much more appropriate.  So that is what I am going to do.  Note: the revolver in the case is a Colt of about the same vintage.  It is nice, but I think that the Remington is “Waaaay Cooler”.

Venture #2

I am going to try to make this an "interactive"…if that is the right word…project.  Unlike the rifle, I’m going to try to take interim photos and I intend to post periodic updates on the progress.   That is my story and I’m stickin’ to it.

‘Til next time…Keep Makin’ Chips

A Good Weekend for a Woodcarver...and a Grampa

When my wife came back from a brief visit with our Daughter, Son-in-law and two grand children last weekend, she said that she thought 2-year old Clara -- who has an affinity for owls -- would *really like* to have a "Grampa-carved" owl for her bedroom wall.

The whole family was to be in town for the my birthday this past Saturday so the question became: "Could I find a suitable owl to use for a pattern and could I get it carved and painted in 5 days?"

If I had to decide what I thought was the Internet's most important use I would say, without a doubt, that it is finding images for carving.

I pulled up Google Images and within 5 minutes I found a picture of the perfect owl (just to the left here).   I don't know for certain but it sure looks like something that flew off  the Disney drawing boards.

I blew up the image to the desired size and printed it out.  Two minutes spent with carbon paper and about five more with the band saw and I was off to the races.

Since the wings exist almost in the same plane (even though one appears to be way in front of the other) and since my basswood was only about 3/4"thick, the entire piece had to be done in rather shallow relief. But the head, which is much smaller needed to be almost done "in the round" for everything to look right. This was the first time that I had ever tried anything like that.

I started carving Monday evening and took my tools and the blank with me on a business trip so I could carve in my hotel room Wednesday night. [Note to self: Remember to send a note of apology to the poor hotel maid that had to vacuum all of those little wood chips out of the rug the next day. I picked up most of them, but those little things really stick! :-)].
I got home Thursday evening but couldn't paint the little guy until Friday evening. I sprayed the owl with Polyurethane Saturday morning and presented it Saturday afternoon. A close call, time-wise, but I think that the results were worth it. Clara was having a snack -- away from her older brother -- so with her parent's permission, I chose that moment to present it.

Clara's reaction? First she cried, "An owl!!!" Then she reached out and hugged it...then me!

Grampa's reaction? Kinda warm all over.

"Til next time...keep makin' chips...Oh...and maybe an owl for your grand-daughter:-)

Barry Badhop and Dusty Jowls -- Sports Superstars

I’ve been going through some of the oldies but goodies so I’m going to be post some of them over the next couple of days.

Case in point: Consider Barry here.  Some days it just doesn’t seem like it’s a good idea to get out of bed.  Barry must be thinking just about now since that “easy pick” grounder took a *bad hop* and is currently attempting to replace his Adam’s apple.  I’ve never been in this particular situation, but I’m betting that starting tomorrow Barry will be re-evaluating his choice of activities.  Maybe he’ll decide to take up woodcarving :-).

 

“Dusty Jowls” here may be having similar thoughts.  It seemed like a really good idea -- at the time -- to grab that ball before it could hit the ground but I’ll bet that Dusty will consider all of the possible implications of his actions after this little episode.  That's gotta hurt!

Wow, I just noticed as I am writing this that these photos have dates on them...I did this carving 7 years ago!

I also just noticed Dusty's jersey number..."0".  I guess that fits :-)

"Til next time...keep makin' Chips!

OK, So Now I'm *Really* Curious...

Since I installed my "hit counter" I have been amusing myself with looking at how many hits the blog gets and where they come from.  In the past couple of weeks the number of hits -- from what appears to be new viewers -- is just going through the roof!...from the UK, Germany, France and a whole slew of folks from Canada.

I'm certainly not complaining.  In fact, I'm *thrilled* that people actually find my blathering on about carving even remotely interesting!  

But I'd love to know *how* people are finding the site and *what you are looking for* when you find me.  If you've got a moment-- and I assume that you *must* because you've taken the time to look me up -- please drop a comment to tell me how you found me and if there is something in particular that you would like to see here.  Maybe I can come up with something that you find even more interesting.

Thanks!

'Til next time...keep makin' chips -- and comments!